YM-M51 Hose Crimping Machine
Manual Hose Crimping Machine
|The amount of die||10 sets of|
|Operating mode||Hand pressure|
|Size and shape||980*600*510|
Install and use:
1.Add 46# hydraulic oil 50kg at a time (it is the original brand oil)
2.Locator installation: first plug the locator into the front end of the machine head (Note: the locator can be directly inserted into the machine head), and plug the other end into the corresponding socket inside the electric control box.
3.the use of the locator: every fall more than a week to press it into a 1 mm, every positive rotation is 0.01 mm, so on, the same specification rubber hose, connectors, metal connectors to achieve the required pressure, no need to move the locator, has pressed the specification, the result of compressed data exactly, when you finish root tubing pressure testing, you have learned, the rest is gradually practice.
1. You should often add oil to the working surface and die base surface, and keep them clean.
2. The working surface of the machine should keep clean (If the machine was not used for a long time). You ought to inject enough grease lubricant before the machine operates.
3. You should ensure the oil clean, otherwise it will decrease the life of machine.
4. Clean oil filter and internal tank regularly,and filter the oil once in a year.